12" Compact Linear Line Array Loudspeaker with Utmost Flexibility
Model: LYON
- High peak power output with exceptional linearity and transient reproduction at any operating level
- Self-powered for simplified setup and increased reliability
- Available in two models for greater flexibility: LYON-M for primary array coverage and LYON-W for wide coverage
- Integrates seamlessly with Meyer Sound’s LEO-M and 1100-LFC
- Applications:
As with LEO, LYON faithfully reproduces the source material, providing uncolored, reliable, and consistent results. With LYON, engineers can feel confident that the sound created on stage and at FOH is faithfully reproduced by the loudspeaker system, so they can focus on delivering their mix to the audience. Today’s plugins allow FOH engineers to apply their desired effects upstream without the need to push loudspeakers to the edge of power compression to achieve an effect. The nature of a linear system guarantees that even the most detailed refinements to the mix can be heard and reproduced consistently across all levels. Linear systems are scalable, allowing engineers to be confident that their studio mix will translate accurately when it’s reproduced at a concert.
Two Versions for Maximum Flexibility
LYON is available in two versions designed to provide maximum flexibility in system design. The LYON-M main loudspeaker serves as the anchor for installations in arenas and large auditoriums, as well as tours and festivals.
LYON-W provides wider horizontal coverage at the bottom of LYON arrays and it can also be used for the top of an out-fill array for upper side arena seating. LYON loudspeakers work seamlessly with LEO-M systems, handling the wider coverage needs at the bottom of LEO-M arrays, and serving as outfill or delay arrays when needed.
Complete System Approach
The self-powered 1100-LFC low-frequency control element and the Galileo Callisto loudspeaker management system round out the LYON system.
The 1100-LFC gives engineers a new level of control and power in the low-frequency domain, and allows them to deploy a variety of low-end steering techniques with headroom and coverage consistency at all levels.
Galileo Callisto is a proven hardware and software solution for driving and aligning Meyer Sound loudspeaker array systems, and it includes versatile filters that make precision calibration for line array systems much more efficient.
For on-stage monitoring, the MJF family of monitors is ready for the task, either the new MJF-210 or the larger MJF-212A.
- High peak power output with exceptional linearity and transient reproduction at any operating level
- Self-powered for simplified setup and increased reliability
- Available in two models for greater flexibility: LYON-M for primary array coverage and LYON-W for wide coverage
- Integrates seamlessly with Meyer Sound’s LEO-M and 1100-LFC
- Applications:
- Medium- to large-scale applications
- Arenas, performing arts centers, theatres, churches, and other fixed installations
- Touring sound reinforcement
- Downfill, midfill, sidefill, and outfill for LEO-M systems
- Horizontal Symmetry - Yes
- Vertical Symmetry - Yes
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 12 in
- Maximum Frequency Response (Bandwidth): 16.50 kHz
- Maximum Frequency Response (Bandwidth): 16500 Hz
- Minimum Frequency Response (Bandwidth): 55 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Certifications: CE, UL
- AC Voltage (Maximum): 235 Volts
- AC Voltage (Minimum): 95 Volts
- Depth: 21 in
- Height: 14.85 in
- Width: 38.15 in
- Product Weight: 199 lbs
- Acoustical:
- Phase Response: 80 Hz to 16 kHz ±30°
- Transducers:
- Low Frequency: Two 12” long-excursion cone drivers
- High Frequency: Two 3” compression drivers
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: XLR female input with XLR male loop output
- Input Impedance: 10 kilo ohm differential between pins 2 and 3
- Wiring
- Pin 1: Chassis/earth through 1 kilo ohm, 1000 pF, 15 V clamped network to provide virtual ground lift at audio frequencies
- Pin 2: Signal +
- Pin 3: Signal –
- Pin 4: RMS
- Pin 5: RMS Case: Earth ground and chassis
- DC Blocking: Differential DC blocking up to the maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter
- Common mode: 425 kHz
- Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing of +20 dBV (10 V rms, 14 V peak) into 600 ? to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier:
- Type: 3-channel complementary MOSFET output stages (class AB/H bridged)
- Cooling: Two ultrahigh-speed primary fans, two ultrahigh-speed reserve fans
- AC Power:
- Connectors: powerCON 32
- Operational Voltage Range
- Turn-on: 85 V AC; Turn-off: 134 V AC
- Turn-on: 165 V AC; Turn-off: 264 V AC
- Current Draw: Idle Current: 0.6 A rms (230 V AC) 0.7 A rms (208 V AC) 1.2 A rms (115 V AC)
- Maximum Long-Term Continuous Current (>10 sec): 5.6 A rms (230 V AC) 6.2 A rms (208 V AC) 11.2 A rms (115 V AC)
- Burst Current (<1 sec): 7.5 A rms (230 V AC) 8.2 A rms (208 V AC) 15.4 A rms (115 V AC)
- Maximum Instantaneous Peak Current: 23 A peak (230 V AC) 25 A peak (208 V AC) 45 A peak (115 V AC)
- Inrush Current: <15 A peak (230 V AC) <15 A peak (208 V AC) <15 A peak (115 V AC)
- RMS Network:
- Equipped with 2?conductor, twisted-pair network, reporting all amplifier operating parameters to host computer
- Construction: Multi-ply hardwood enclosure, Hex-stamped steel grille
- Color: Black
Suggested Products
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com