The MM-10 miniature subwoofer delivers expanded low frequency for applications that require excellent audio quality from a compact system. Designed primarily as a companion to Meyer Sound's MM-4XP miniature loudspeaker, as well as the UP-4XP ultracompact loudspeaker, the MM-10 allows system designers to create full-range systems where space limitations are a concern.
The MM-10 features an operating frequency range of 33 Hz to 228 Hz with a conservatively rated maximum peak SPL of 123 dB. The MM-10 bass reflex cabinet houses a single 10-inch driver and a single-channel power amplifier complete with onboard processing, including a crossover, driver protection, and frequency and phase correction. The built-in crossover accepts full-range signals, facilitating basic daisy-chaining for signal distribution, eliminating the need for external crossovers in small setups.
The MM-10 subwoofer is available from the factory in three models - the MM-10XP, MM-10AC, and MM-10ACX - each offering different internal configurations and audio and power connectors (which cannot be upgraded).
Powerful low-frequency response from a very small cabinet
Low distortion affords exceptionally clean bass
Adaptable to complement MM-4XP and UP-4XP loudspeakers
Versions include 48 V DC external power supply or built-in AC power for driving satellite loudspeakers
Portable AV systems
Compact voice reinforcement systems
Type: Class D
Output Power: 220W
Total Output: 440W
THD, IM, TIM: <0.2%
Load Capacity: 4 ohms
Type: Differential, electronically balanced
Maximum Common Mode Range: ±5 V DC
Input Impedance: 10kohm electronically balanced
DC Blocking: 4.8 Hz high pass
CMRR: < –60 dB, typically < –72 dB (200 Hz – 3 kHz)
RF Filter: Common mode: 616 kHz
Nominal Input Sensitivity:–2.0 dBV (0.8 V rms, 1.1 V peak) continuous is typically the onset of limiting for noise and music
Input Level: Audio source must be capable of producing +16 dBV (6.3 V rms,
9.0 V peak) into 600 ohms to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
Type: 10" cone driver with neodymium magnet
Nominal Impedance: 4 ohms
Voice Coil Size: 2"
Power Handling: 400 W (AES)
Operating Frequency Range: 33 Hz – 228 Hz
Frequency Response: 35 Hz – 208 Hz ±4 dB
Phase Response: 38 Hz – 138 Hz ±45°
Maximum Peak SPL: 123 dB
Dynamic Range: <100 dB