Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Self-Powered Miniature Loudspeaker
Series: Industrial Series
Model: MM-4XP
- Extremely compact enclosure
- Self-powered
- Wide-range frequency response at ultralow distortion
- High speech intelligibility, and punch and bandwidth for music
- Amazing SPL/size ratio
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The MM-4XP miniature loudspeaker is a self-powered loudspeaker designed for high-quality distributed systems. Housed in a compact aluminum enclosure, the MM-4XP is especially suitable for installations involving space limitations and visibility concerns, such as fill and spot coverage, and hidden locations like chancel steps in a house of worship.Its flexible and easy-to-configure mounting options, as well as its ability to effortlessly reproduce both speech and music, make it an excellent choice for fixed applications, theatrical presentations (stage lip frontfill), and small portable systems for corporate AV solutions.The MM-4XP meets the same exceptional performance standards established by its predecessor, the MM-4, and adds the advantages of self-powered systems, with onboard amplification and signal processing.The MM-4XP's proprietary 4-inch cone transducer, manufactured at Meyer Sound's Berkeley factory, delivers an impressive maximum peak SPL of 113 dB, and has a wide operating frequency range of 120 Hz to 18 kHz with very low distortion.The MM-4XP exhibits the same high intelligibility and flat frequency and phase responses for which Meyer Sound loudspeakers are known.Peak and rms limiters regulate loudspeaker temperatures and excursion, ensuring that the MM-4XP performs exceedingly well even when driven into overload.The MM-4XP's amplifier and signal-processing circuits are designed to store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and long cable runs.The MM-4XP receives balanced audio and DC power from a SwitchCraft EN3 connector on its rear panel.The sealed, 5-pin EN3 connector provides protection against harsh environmental conditions when the MM-4XP is installed outdoors.MM-4XP loudspeaker systems require an MPS-488 external power supply.The single-space 19-inch rack unit receives eight channels of balanced audio from its XLR female inputs and routes the audio, along with 48 V of DC power, to its eight channel outputs.The MPS-488 channel outputs, equipped with either 5-pin Phoenix connectors or 5-pin EN3 connectors, can deliver DC power to the MM-4XP loudspeakers at cable lengths of up to 300 feet with just 1 dB of loss in peak SPL using 18 AWG wire.The use of composite multi-conductor cables (such as Belden 1502) allows a single cable to carry both audio and DC power to the MM-4XP. Longer cable lengths are possible for moderate applications that don't drive the loudspeakers to maximum output, or for installations with heavier wire gauges.Powering the MM-4XP from a unipolar external power source reduces induced noise significantly and eliminates the need for wiring conduits.MM-4XP loudspeaker systems require an MPS-488HP external power supply. The MPS-488HP rackmount 8-channel power supply is ideal for larger installations with multiple loudspeakers and distributes power and audio signal, while the compact MPS-481 is designed for powering single loudspeakers individually.
- Extremely compact enclosure
- Self-powered
- Wide-range frequency response at ultralow distortion
- High speech intelligibility, and punch and bandwidth for music
- Amazing SPL/size ratio
- Enables runs of hundreds of feet of light-gauge cable
- Applications
- Space-sensitive fill and spot coverage
- Reinforcement concealed in steps and other hidden locations
- High-quality distributed systems for paging and music
- Small, portable systems for corporate AV
- Exhibit audio for museum displays
- Rackmountable - Yes
- Powered (Active) - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 120 Hz
- Minimum Frequency Response (Bandwidth): 0.12 kHz
- Construction: Perforated steel, Extruded aluminum
- Coverage Horizontal: 80 degrees
- Coverage Vertical: 80 degrees
- Impedance: 10000 ohm
- Maximum SPL (Sound Pressure Level): 113 dB
- Power Handling: 100 Watt
- Active Power: 220 Watt
- Current Draw: 2.20 Amps
- DC Voltage: 48 Volts
- Peak Power: 440 Watt
- Depth: 5.72 in
- Height: 4.04 in
- Width: 4.04 in
- Product Weight: 4.20 lbs
- Color: Black
- Frequency Response: 135 Hz - 17 kHz ±4 dB
- Phase Response: 400 Hz - 20 kHz ±45 Degree
- Signal to Noise: >110 dB
- Overall Length: Female XLR input with male XLR loop outputor VEAM all-in-one connector (integrates AC, audio and network)
- Input Impedance: 10 kohms differential between pins 2 and 3
- Wiring: Pin 1: Chassis/earth through 220 k Ohms, 1000 pF, 15 V clamp network, to provide virtual ground lift at audiofrequencies, Pin 2: Signal +, Pin 3: Signal -, Case: Earth ground and chassis
- THD, IM, TIM: <.02 %
- Sensitivity: 2.50 dBV
- Rackmountable: Yes
Meyer Sound MM-4XP Data Sheet.pdf
550 kb
- Data Sheet
Project List
Meyer Sound MM-4XP Operating Instructions.pdf
3565 kb
- Instructions
Project List
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: MM-4XP
Request more information from a dealer near you
close
Request more information from a dealer near you