Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
UltraCompact Subwoofer
Series: UltraSeries
Model: UMS-1P
- Powerful extended low-frequency response in a very compact cabinet
- Linear driver excursion ensures exceptionally clean bass response with very low distortion
- Adaptable to complement UPM and HD-1 systems
- Flat, phase-corrected response ensures maximum fidelity
- Applications: Mix suites, Small theatre and audio-visual, Houses of worship
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
An extremely compact, self-powered system, the UMS-1P ultra-compact subwoofer provides powerful low-frequency exten- sion in applications where both excellent audio quality and an unobtrusive cabinet size are required. The system's output is 127 dB peak SPL within its operating range of 25 Hz to 160 Hz. Although designed primarily as a companion for Meyer Sound's UPM-1P wide coverage and UPM-2P narrow coverage ultra-compact loudspeakers, the UMS-1P is equally adaptable for use with other Meyer Sound models such as the HD-1 high-definition studio monitor. The UMS-1P may be used singly or stacked to provide even greater low-frequency output. The tuned bass-reflex enclosure houses two 10-inch cone drivers, each powered by a dedicated channel of an integral class AB/bridged power amplifier with complementary MOSFET output stages. Total peak power is 450 watts. Each channel incorporates a limiter that prevents driver over-excursion and regulates the voice coil temperature. A smooth limiting characteristic effectively protects the drivers without the compression effects imposed by typical limiters, allowing high output levels across the drivers' entire frequency range. The internal electronics also provide active signal processing, including phase correction circuitry that delivers flat frequency and phase response over the entire operating range. Integrating a built-in low-pass crossover while accepting a full-range signal, the UMS-1P's input allows for simple daisy-chain signal distribution and eliminates the need for external crossovers. Field-replaceable audio input modules accommodate a range of applications. The standard version offers looping XLR input and output connectors, while an enhanced looping version adds polarity switching (the looping output is not affected) and input attenuation (0 dB to -18 dB). A summing mono version with two inputs is also available. The standard UMS-1P is switchable between the 115 V AC and 230 V AC ranges. A 100 V AC version is also available. The integral power supply suppresses high-voltage transients and also provides EMI filtering. Dual locking PowerCon connectors facilitate AC looping. The UMS-1P's durable enclosure is constructed from premium birch plywood and is covered with a black textured hard-shell finish. A hex-stamped steel grille and a charcoal grey foam cover are included. A pole mount for supporting a UPM-1P or UPM-2P is fitted as standard. Options include custom color finishes, and cabinets with no handles for fixed applications requiring specific cosmetics. The UMS-1P is compatible with the RMS remote monitoring system, which offers comprehensive monitoring of system parameters on a Windows-based network.
- Powerful extended low-frequency response in a very compact cabinet
- Linear driver excursion ensures exceptionally clean bass response with very low distortion
- Adaptable to complement UPM and HD-1 systems
- Flat, phase-corrected response ensures maximum fidelity
- Applications: Mix suites, Small theatre and audio-visual, Houses of worship
- Horizontal Symmetry - Yes
- Vertical Symmetry - Yes
- Spec Sheet available - Yes
- Width: 22.75 in 578 mm
- Height: 16.30 in 415 mm
- Depth: 17.51 in 445 mm, 16 inch without grill
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 135 Hz
- Maximum Frequency Response (Bandwidth): 0.14 kHz
- Minimum Frequency Response (Bandwidth): 29 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Finish: Black Textured
- Impedance: 4 ohm
- Maximum SPL (Sound Pressure Level): 127 dB
- Power Handling: 400 Watt
- Sensitivity: 0 dB
- AC Voltage: 230 Volts
- Current Draw: 0.50 Amps
- Product Weight: 62 lbs
- Color: Black
- Coverage Horizontal: 360 degrees
- Coverage Vertical: 180 degrees
- Horizontal Symmetry: Yes
- Vertical Symmetry: Yes
- Amplifier - Type: Complementary MOSFET output stages (class AB/bridged)
- Amplifier - Burst capability: 225 Wrms / channel
- Amplifier - THD, IM, TIM: < 0.02 %
- Power: 400 Watt 1 second burst
UMS-1XP
- Ultracompact Subwoofer, Intelligent DC
UPA-1P
- Compact Wide Coverage Loudspeaker
UPA-2P
- Compact Narrow Coverage Loudspeaker
UPJ-1P
- Compact VariO Loudspeaker
UPJunior
- 2-Channel UltraCompact VariO Loudspeaker, 300W
UPJunior-XP
- Ultracompact VariO Loudspeaker, IntelligentDC
UPM-1P
- 2-Channel UltraCompact Wide Coverage Loudspeaker, 350W
UPM-1XP
- Ultracompact Wide-Coverage Loudspeaker, IntelligentDC
UPM-2P
- UltraCompact Narrow Coverage
UPQ-1P
- Wide Coverage Loudspeaker
UPQ-2P
- Narrow Coverage Loudspeaker
USW-1P
- Compact Subwoofer
Meyer Sound UMS-1P Data Sheet.pdf
498 kb
- Data Sheet
Project List
Meyer Sound UMS-1P Operating Instructions.pdf
685 kb
- Instructions
Project List
Speaker-Ultra_Compact_Subwoofer_Speaker-Meyer_Sound-UMS-1P.rfa
248 kb
- BIM Objects
Project List
Subwoofer-Ultra_Series-Meyer_Sound-UltraCompact.rfa
580 kb
- BIM Objects
Project List
UMS-1Pr13.dwg
738 kb
- BIM Objects
Project List
UMS-SM_2D.dxf
304 kb
- BIM Objects
Project List
UMS-SM_2D.dwg
103 kb
- BIM Objects
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close

McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: UMS-1P
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you