Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Ultracompact Subwoofer, Intelligent DC
Series: LF
Model: UMS-1XP
- External DC power affords the flexibility of lengthy cable runs without conduits
- Extremely compact cabinet with powerful, extended low-frequency response
- Linear driver excursion ensures exceptionally clean bass responses with very low distortion
- Ideal companion to the externally powered UPM-1XP and UPJunior-XP ultracompact loudspeakers
- Applications: Theatrical sound reinforcement, Portable and installed AV systems, Houses of worship, Mix suites
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The externally powered UMS-1XP is an extremely compact subwoofer that provides powerful low-frequency extension. The UMS-1XP offers the same 127 dB peak SPL output and 25 Hz to 160 Hz operating range as the UMS-1P while also offering all the advantages of external DC power, making it an ideal solution for installations where AC cabling is not feasible. Powering the UMS-1XP from an external MPS power supply affords the flexibility of lengthy cable runs without conduits. The UMS-1XP is a logical companion to any of Meyer Sound's externally powered loudspeakers. For installations requiring even greater low-frequency headroom, multiple UMS-1XPs can be stacked. A tuned, bass-reflex enclosure houses the UMS-1XP's two 10-inch cone drivers. The drivers are powered by two channels of Class-D amplification yielding a total peak power output of 450 watts. Each driver channel includes a limiter that prevents overexcursion and regulates voice coil temperatures, ensuring smooth limiting characteristics and high output levels across the subwoofer's entire frequency range. The UMS-1XP receives DC power and balanced audio from a single loudspeaker connector, available as a Phoenix 5-pin male, sealed SwitchCraft EN3 5-pin male, or sealed ECO-M 7-pin male. The use of composite multiconductor cables (such as Belden 1502 or equivalent) allows a single cable to carry both DC power and balanced audio to the UMS-1XP. The loudspeaker's amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. UMS-1XP subwoofer systems require an MPS-488HP external power supply. The rack mount multichannel power supply can deliver DC power and balanced audio to eight UMS-1XP subwoofers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire. Longer cable runs are possible with heavier wire gauges. The UMS-1XP's durable enclosure is constructed of premium birch plywood and coated with a black- textured, hard-shell finish. A powder-coated, hex- stamped grille with black mesh protects the unit's drivers. The cabinet top includes a 1 3/8-inch receptacle for pole-mounting the UPM-1XP or UPJunior-XP with the optional MPS-UMS stand. The UMS-1XP is also available from the factory with threaded end plates and the UMS-SM U-bracket for single-mount configurations. Custom color finishes are also available for installations with specific cosmetic requirements.
- External DC power affords the flexibility of lengthy cable runs without conduits
- Extremely compact cabinet with powerful, extended low-frequency response
- Linear driver excursion ensures exceptionally clean bass responses with very low distortion
- Ideal companion to the externally powered UPM-1XP and UPJunior-XP ultracompact loudspeakers
- Applications: Theatrical sound reinforcement, Portable and installed AV systems, Houses of worship, Mix suites
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 10 in
- Maximum Frequency Response (Bandwidth): 160 Hz
- Maximum Frequency Response (Bandwidth): 0.16 kHz
- Minimum Frequency Response (Bandwidth): 25 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Finish: Black Textured
- Impedance: 10000 ohm
- Maximum SPL (Sound Pressure Level): 127 dB
- Power Handling: 450 Watt
- Sensitivity: 0 dBV
- DC Voltage: 48 Volts
- Depth: 17.51 in
- Height: 16.30 in
- Width: 22.75 in
- Product Weight: 58 lbs
- Color: Black
- Coverage: 360° single unit; varies for multiple units
- Transducers: Two 10” cone drivers
- Amplifier: Two channels (Class-D)
- Amplifier Output Power: 450 W total
- Amplifier Load Capacity: 4 ohm (both channels)
UMS-1P
- UltraCompact Subwoofer
UP-4XP
- UltraCompact Loudspeaker, 48VDC
UPA-1P
- Compact Wide Coverage Loudspeaker
UPA-2P
- Compact Narrow Coverage Loudspeaker
UPJ-1P
- Compact VariO Loudspeaker
UPJunior
- 2-Channel UltraCompact VariO Loudspeaker, 300W
UPJunior-XP
- Ultracompact VariO Loudspeaker, IntelligentDC
UPM-1P
- 2-Channel UltraCompact Wide Coverage Loudspeaker, 350W
UPM-1XP
- Ultracompact Wide-Coverage Loudspeaker, IntelligentDC
UPM-2P
- UltraCompact Narrow Coverage
UPQ-1P
- Wide Coverage Loudspeaker
UPQ-2P
- Narrow Coverage Loudspeaker
USW-1P
- Compact Subwoofer
ums-1xp_ppi.pdf
321 kb
- Data Sheet
Project List
Schedule - Subwoofer-Ultra_Series-Meyer_Sound-UltraCompact.rvt
3948 kb
- BIM Objects
Project List
Subwoofer-Ultra_Series-Meyer_Sound-UltraCompact.rfa
580 kb
- BIM Objects
Project List
Request Quote
Suggested Products
by
Electro-Voice
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: UMS-1XP
Request more information from a dealer near you
close
Request more information from a dealer near you