Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-channel Wireless RF Receiver
Series: AD
Model: AD4Q
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Quadversityâ„¢ mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Other Options
The AD4Q Axient Digital Quad Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity™, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
- Wide tuning range up to 184MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® and ShurePlus™ Channels app
- Quadversityâ„¢ mode for extended antenna coverage and improved RF signal-to-noise
- Front panel headphone jack enables Dante Cue and Dante Browse monitoring
- Configurable Ethernet switch for redundant Dante digital output
- Switchable XLR/AES3 outputs
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- Optional DC module available to support redundant power
- Wireless Receiver Transmission - RF
- Wireless - Yes
- Spec Sheet available - Yes
- Depth: 13.10 in
- Height: 1.70 in
- Width: 19 in
- Product Weight: 10.60 lbs
- Current Draw: 0.68 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Number of Channels: 4
- Housing: Steel, Extruded aluminum
- Thermal Dissipation: Maximum: 31 W (106 BTU/hr), Idle: 21 W (72 BTU/hr)
- Audio Output:
•Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
•Configuration: 1/4" (6.35 mm): Transformer-coupled Balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
•Impedance: 100-ohm
•Full Scale Output: 1/4" (6.35 mm): +8 dBV XLR: LINE setting= +18 dBV, MIC setting= –12 dBV
•Mic/Line Switch: 30dB pad
•Phantom Power Protection: Yes - NETWORKING:
•Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
•Network Addressing Capability: DHCP or Manual IP address
•Maximum Ethernet Cable Length: 100 m (328 ft) - Cascade output:
•Connector Type: BNC
•Note: For connection of one additional receiver in the same band
•Configuration: Unbalanced, passive
•Impedance: 50-ohm
•Insertion Loss: 0dB, typical - RF Input:
•Spurious Rejection: >80dB, typical
•Connector Type: BNC
•Impedance: 50-ohm
•Bias Voltage 12 to 13.5VDC, 150mA maximum, per antenna, switchable on/off
•RF Carrier Frequency Range
•AD4Q=A: 470-636MHz
•AD4Q=B: 606-810MHz
•AD4Q=C: 750-960MHz
AD3=-G57
- 470 to 616 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-K54
- 606 to 663 MHz Axient Digital Plug-On Wireless Transmitter
AD3=-X55
- 941 to 960 MHz Axient Digital Plug-On Wireless Transmitter
Axient Digital
- Wireless Digital Audio System
Transmitter/Receiver
872074 kb
- Data Sheet
Project List
by
Shure Incorporated
Model: AD4Q-DC=-A
by
Shure Incorporated
Model: AD4Q-DC=-B
by
Shure Incorporated
Model: AD4Q-DC=-C
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Shure Incorporated
Model: AD4Q
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you