Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
BETA 53 Omnidirectional Headworn Condenser Microphone with 4-Pin Mini Connector (TA4F), Tan
Series: Shure
Model: WBH53T
- Comfortable, latex-free Dynaflex® earforms that hide behind the ears
- Thin, non-reflective wireframe that is easily hidden underneath hair
- Ultra-thin detachable microphone boom mount for right or left positioning
- Interchangeable frequency response caps (mild or high, two pieces each)
- Clothing clip for securing cable
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The WBH53T is a fully adjustable omnidirectional condenser microphone, designed for applications where unconspicuous appearance and incredible sound quality are required. It's lightweight, adjustable, modular headband, flexible wireframe and soft earpieces provide a comfortable fit while still allowing the Beta 53 to be positioned as close to the left or right corner of the mouth as possible, assuring maximum voice pickup. The Beta 53 microphone itself features an extended frequency response and high SPL handling ability. The WBH53T is uniquely designed to provide the sound quality and performance consistency required for environments such as professional theater, event production, trade shows or seminars - the best sound with minimal visibility. This comes with 5 feet attached Cable with 4-Pin Mini Connector (TA4F), Foam Windscreen, Clothing Clip and Carrying Case.
- Comfortable, latex-free Dynaflex® earforms that hide behind the ears
- Thin, non-reflective wireframe that is easily hidden underneath hair
- Ultra-thin detachable microphone boom mount for right or left positioning
- Interchangeable frequency response caps (mild or high, two pieces each)
- Clothing clip for securing cable
- Corrosion resistant
- Easy to clean
- Durable carrying case for protective storage
- Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility
- Omnidirectional polar pattern for minimal handling noise and flexible microphone placement
- Extended, flat frequency response provides accurate speech and vocal reproduction
- Foam windscreens minimize breath noise and popping
- Available with an in-line preamp or with a TA4F connector for wireless applications
- Microphone Type - Electret Condenser
- Headset Mic Type - Condenser
- Headset Mic Type - Electret
- Polar/Pickup Pattern - Unidirectional
- Microphone Connectivity - Wired
- Type: Condenser (electret bias)
- Frequency Response: 20 Hz to 20,000 KHz
- Polar Pattern: Omnidirectional
- Recommended Minimum Input Impedance: 20 kohms
- Output Level: Open circuit voltage: -54dBV/Pa (1 Pascal=94dB SPL)
- Maximum Sound Pressure Level: 142dB at 1% THD/1 kohm load
- Dynamic Range: 103 dB
- Output Noise (Equivalent SPL, A-weighted): 39dB typical; 42dB maximum
- Signal to Noise: 55dB at 94dB SPL
- Current Drain: 60–130 µA
- Polarity: Positive pressure on the diaphragm produces a positive voltage at pin 3 relative to pin 1 at the output connector of the microphone
- Power Requirements: +5 Vdc on pin 2, return on pin 1 (ground)
- Operating Temperatures: -18 to 57 Degree C 0 to 135 Degree F
- Storage Temperatures: -29 to 74 Degree C -20 to 165 Degree F
- Humidity: 0 to 95 %
- Cable: 5 feet (1.5 m), small-diameter, shielded, with mini 4-pin connector (TA4F)
- Maximum load protection: Beige
- Furnished Accessories: 2 foam windscreens, 2 High Boost Equalization Caps, 2 Mild Boost Equalization Caps, 1 Swiveling Lapel Clip and 1 Plastic Carrying Case, black
- Net Weight: 1.25 oz (35.35 g) with cable and TA4F connector
- Operating Temperature (Maximum): 135 F
- Operating Temperature (Minimum): 0 F
- Cable Length: 5 ft
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 103 dB
- Maximum SPL (Sound Pressure Level): 142 dB
- Signal to Noise Ratio: 55 dB
- Product Weight: 0.08 lbs
- Color: Tan
- Impedance: 1000 ohm
- Regulatory Compliance: CE, EMC
RPM132
- Microphone Boom Cable Assembly for WBH53 Microphone, Black
RPM208
- High Boost EQ Caps, Black
RPM212
- High Boost EQ Caps, Tan
RPM304
- Microphone Windscreens for Shure MC50B, MC51B, WL50, WL51, WBH53, and Beta 53 Microphones
RPM306
- Tan Foam Windscreens for MC50B, MC51B, WL50, WL51, WBH53, and Beta 53 Microphones
RPM308
- White Foam Windscreens for MC50B, MC51B, WL50, WL51, WBH53, and Beta 53 Microphones
RPM560
- Headband for Beta53/WBH53/Beta54/WBH54 Microphone, Tan
WBH53B
- BETA 53 Omnidirectional Headworn Condenser Microphone with 4-Pin Mini Connector (TA4F), Black
WBH54B
- Wireless Headworn Vocal Microphone with 50Hz to 20kHz Frequency Response, Black
User guide for Headworn Vocal Microphone
590 kb
- Instructions
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Shure Incorporated
Model: WBH53T
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you