Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Cardioid Headworn Dynamic Microphone with 1/4-inch Connector
Series: Shure
Model: WH20QTR
- Features a right-angle 1/4-inch phone plug for use with Shure Headset Wireless Microphone Systems or any unbalanced microphone input
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The Shure WH20QTR is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20QTR is suitable for any voice communications application where comfort and reliability are required. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
- Features a right-angle 1/4-inch phone plug for use with Shure Headset Wireless Microphone Systems or any unbalanced microphone input
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Condenser
- Headset Mic Type - Dynamic
- Polar/Pickup Pattern - Unidirectional
- Impedance: Microphone rating impedance is 150 ohms (200 ohms actual)
- Operating Temperature (Maximum): 140 F
- Operating Temperature (Minimum): 0 F
- Cable Length: 4 ft
- Maximum Frequency Response (Bandwidth): 15 kHz
- Maximum Frequency Response (Bandwidth): 15000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Impedance: 200 ohm
- Sensitivity: 38.40 dB
- Product Weight: 0.14 lbs
- Type: Dynamic, Close-Talking
- Output Level (close-talked (At 12.5 mm (1/2 inch) at 1,000 Hz): Open Circuit Voltage –67.0 db/Pa (0.45 mV), (1 Pa = 94 dB SPL)
- Storage Temperatures: –29 to 74 Degree C (–20 to 165 Degree F)
- Humidity: 0 to 95 %
- Cable: Attached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor
- Cable Connector: Right-angle 1/4-inch phone plug
- Regulatory Compliance: CE, EMC
RK318WS
- Black Foam Windscreens and Clothing Clip for all WH10, WH20 Headworn Microphones
RK319
- Replacement Croakies Headset Band
RPM600
- Elastic Headband and Wire Frame, Black
WH20
- Dynamic Headset Microphone
WH20TQG
- Cardioid Headworn Dynamic Microphone with 4-Pin Mini Connector (TA4F)
WH20XLR
- Dynamic Headset Microphone, Includes 3-pin Male XLR Connector w/ Detachable Belt Clip
User guide for Dynamic Headset Microphone
159 kb
- Instructions
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Shure Incorporated
Model: WH20QTR
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you