Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Thinklogical, A Belden Brand - SDI-000S01-LCTX
Request Quote
All Products
SDIXtreme 3G Fiber Optic Extender Transmitter, Single-mode, LC
Series: SDIXtreme 3G
Model: SDI-000S01-LCTX
- Multi-standard operation from 270mbit/s to 3Gbit/s
- SMPTE 424M, 292M, 259M, and 297M compliant
- Supports HD/SD-SDI inputs with embedded audio and ancillary data
- Distribute uncompressed broadcast quality signals over single mode fiber upto 40km
- Signals are equalized and re-clocked on the receiver
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
SDIXtreme 3G product series is a compact, broadcast quality, SDI over fiber extension system. The system is designed to transmit up to two SD/HD signals or one 3G SDI signal with or without embedded audio and data, and is SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. The system also supports either single or multimode fiber, and is fully compatible with Thinklogical’s VX and HDX Router line of products.
- Multi-standard operation from 270mbit/s to 3Gbit/s
- SMPTE 424M, 292M, 259M, and 297M compliant
- Supports HD/SD-SDI inputs with embedded audio and ancillary data
- Distribute uncompressed broadcast quality signals over single mode fiber upto 40km
- Signals are equalized and re-clocked on the receiver
- Equalized and re-clocked SDI loop through on the transmitter
- Signal transmission via fiber optic cable, no RF interference
- Supports both single mode and multi-mode fiber types
- Cable equalization on inputs and cable drivers on outputs to ensure signal integrity
- 15dB optical link budget @ 2.97Gbps
- Hot swappable/pluggable SFP optics with LC connectors
- Supports pathological patterns at all rates
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Audio
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 23 F
- DC Voltage: 12 Volts
- Product Weight: 1 lbs
- Indicators: (3) Power, Data Rate HD, SD Lock Detect
- Dimensions: 4.96 x 2.25 x 1.03 (in) (125.98 x 57.12 x 26.14mm)
- Number of Inputs: 1
- Data Rate Range: 270Mbps to 2.97Gbps
- Supported Standards: SMPTE 259M, 292, 297, 424M DVB-ASI
- Re-clocked Data Rates: 270Mbps (SMPTE 259M, DVB-ASI-270), 1.485Gbps (SMPTE 292), 2.97Gbps (SMPTE 494M)
- Equalization: Automatic up to 140m of Belden 1694A at 3.0Gbps, 230m at 1.485Gbps and 350m at 270Mbps
- Return Loss: >10dB up to 2.97Gbps
- Signal Level: 800 mV (±10%)
- DC Offset: 0V ± 0.5V
- Optical Output Connector: LC Receptacle
- Wavelength: 1310 Nm (nominal)
- Emmiter Type: FP Laser
- Output Power: -3dBm at 270Mbps, -3dBm at 1.485Gbps, -3dBm at 2.97Gbps
- Operating Distance (Singlemode): 131233.60 ft
- Number of Singlemode Inputs: 1
- Number of Singlemode Outputs: 1
SDI-000M01-LCTX
- SDIXtreme 3G Fiber Optic Extender Transmitter, Multi-mode, LC
Fiber Optic Extender Receiver/Transmitter
1110 kb
- Data Sheet
Project List
Request Quote
Suggested Products
by
Evertz
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
thinklogical
Model: SDI-000S01-LCTX
Request more information from a dealer near you
close
Request more information from a dealer near you