Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Thinklogical, A Belden Brand - SDI-0200X1-LCRX
Request Quote
All Products
SDIXtreme 3G+ Receiver with 2 SFPs, 2 Individual SDI Outputs
Series: SDIXtreme 3G+
Model: SDI-0200X1-LCRX
- Extends SDI signals over fiber
- RS-422 port for device control ideal for remote camera operations requiring pan, tilt and zoom functions
- Multi-standard operation from 270mbit/s to 3Gbit/s
- SMPTE 424M, 292M, 259M, 372M, 425 level A and B compliant
- Supports 3G/HD/SD SDI inputs with embedded audio and ancillary data
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
SDIXtreme 3G+ product series is a compact, broadcast quality, SDI over fiber extension system. The system is designed to transmit up to two SD/HD signals or one 3G SDI signal with or without embedded audio and data, and is SMPTE 424M, 292M, 259M, 372M and 425 level A and B compliant. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. The system also supports either single or multimode fiber, and is fully compatible with Thinklogical’s VX and HDX Router line of products.
- Extends SDI signals over fiber
- RS-422 port for device control ideal for remote camera operations requiring pan, tilt and zoom functions
- Multi-standard operation from 270mbit/s to 3Gbit/s
- SMPTE 424M, 292M, 259M, 372M, 425 level A and B compliant
- Supports 3G/HD/SD SDI inputs with embedded audio and ancillary data
- Additional options for the transmitter component include loop-out, or dual channel
- Uses standard SFP+ optics with LC connectors does not require costly SFP+ pathological modules
- Auto detects input video format and displays on LEDs
- Cable equalization on inputs and cable drivers on outputs to ensure signal integrity
- Supports pathological patterns at all rates
- Transceiver model available for bi-directional video extension
- Equalized and re-clocked SDI loop through on the transmitter
- Signals are recovered and re-clocked on the receiver
- Low cost hot swappable/pluggable standard SFP+ optics with LC connectors
- Distribute uncompressed broadcast quality signals over single mode fiber up to 40 km
- Support for standard 2.97 (3G), 1.485 (HD), 270 (SD), and fractional 1/1.001 rates
- Compatible with all Thinklogical VX and HDX Routers
- Auto detects input video format and displays on LEDs
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Audio
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 23 F
- DC Voltage: 12 Volts
- Depth: 3.43 in
- Height: 1.68 in
- Width: 5.61 in
- Product Weight: 1 lbs
- Shipping Weight: 4 lbs
- Indicators: (3) Power, Data Rate SD, HD, 3G Lock Detect Active
- Fiber Input Connector: LC receptacle
- Wavelength: Multi-mode: 770 to 860nm, Single-mode: 1260 to 1360nm
- Minimum Input Sensitivity: Multi-mode: -12dBm, Single-mode -15dBm
- Maximum Input Power: Multi-mode: 0dBm, Single-mode: 0.5dBm
SDI-C100X1-LCRX
- SDIXtreme 3G+ Receiver with 1 SFP, 2 SDI Outputs
SDI-M100X1-LCRX
- SDIXtreme 3G+ Receiver with 1 SFP, 2 Individual De-multiplexed SDI Outputs
SDIXtreme 3G+ Transmitter/Receiver
355 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
thinklogical
Model: SDI-0200X1-LCRX
Request more information from a dealer near you
close
Request more information from a dealer near you