Pro AV Catalog
				
	
	
	
	
	
	
Manufacturers
		
	
	
	
	PRODUCT CATEGORIES
		
	
	
	
	
	
		Matching Keywords
			
		
		
		
	
	Model Numbers
		
	
	
				
							
							15 Volvo Drive 
Rockleigh, NJ 07647
United States
							
						
					Rockleigh, NJ 07647
United States
Crestron Electronics, Inc.
Crestron offers the only complete end-to-end solution with a complete line of hardware and software. Crestron not only connects and controls devices; we integrate and automate all the building systems to provide a connected experience. We deliver integrated solutions for audio, video, IP, lighting and climate control making wiring and installations easier and promoting system integrity.
				
					
			Model: DMPS3-4K-350-C
	
	Featured Product 
			
					Project List
				
			
		Crestron Delivers a Unique Single-Wire Control and HDMI Extender Solution
   
ROCKLEIGH, NJ, July 28, 2009 – Crestron has released an HDMI-over-fiber transmitter and receiver pair that provides a remarkably powerful, easy to install solution for extending uncompressed HDMI and IR/RS-232 control signals up to 1000 feet over a single multimode fiber connection. Ideal for commercial and residential retrofits, the HD-TX1-F and HD-RX1-F make it easy to add an HDMI device in an analog room, or extend an HDMI signal and device control from, for example, a home theater to another room or area in or around the home. Now integrators can add a new source or display device with ease, even after a project has been completed.
   
The TX1-F and RX1-F enable a source or display device to be located remotely from the central equipment. Components such as Crestron HDMI switchers (HD-MD8x1 and HD-MD8x2) or Adagio® Media System (AMS) can be installed in the central rack and feed a display device or receive a signal from a computer or disc player up to 1000 feet away. The TX1-F and RX1-F can also connect two HDMI switchers in different parts of a building, allowing signals from one to be shared with the other.
   
The TX1-F and RX1-F extend uncompressed digital video, audio, and control signals; support HDMI 1.3a with Deep Color and 7.1 channel HD lossless audio; pass EDID, CEC, and HDCP, and handle resolutions up to 1920x1200 and 1080p60. Using Crestron adapters, these products are also compatible with DisplayPort multimode or DVI devices. No programming or configuration is needed to implement the pair, and a 12VDC power pack is included. Built-in universal IR repeaters have a range of up to 192kHz, and the bidirectional RS-232 extenders reach up to 115k Baud.
   
Three choices of Crestron CresFiber™ pre-terminated multimode fiber cables will be available soon, simplifying installation even further: standard in-wall; armored in-wall (for more rugged environments), and transparent “fishing wire” fiber for virtually invisible outside-the-wall cable runs.
	
	
		
ROCKLEIGH, NJ, July 28, 2009 – Crestron has released an HDMI-over-fiber transmitter and receiver pair that provides a remarkably powerful, easy to install solution for extending uncompressed HDMI and IR/RS-232 control signals up to 1000 feet over a single multimode fiber connection. Ideal for commercial and residential retrofits, the HD-TX1-F and HD-RX1-F make it easy to add an HDMI device in an analog room, or extend an HDMI signal and device control from, for example, a home theater to another room or area in or around the home. Now integrators can add a new source or display device with ease, even after a project has been completed.
The TX1-F and RX1-F enable a source or display device to be located remotely from the central equipment. Components such as Crestron HDMI switchers (HD-MD8x1 and HD-MD8x2) or Adagio® Media System (AMS) can be installed in the central rack and feed a display device or receive a signal from a computer or disc player up to 1000 feet away. The TX1-F and RX1-F can also connect two HDMI switchers in different parts of a building, allowing signals from one to be shared with the other.
The TX1-F and RX1-F extend uncompressed digital video, audio, and control signals; support HDMI 1.3a with Deep Color and 7.1 channel HD lossless audio; pass EDID, CEC, and HDCP, and handle resolutions up to 1920x1200 and 1080p60. Using Crestron adapters, these products are also compatible with DisplayPort multimode or DVI devices. No programming or configuration is needed to implement the pair, and a 12VDC power pack is included. Built-in universal IR repeaters have a range of up to 192kHz, and the bidirectional RS-232 extenders reach up to 115k Baud.
Three choices of Crestron CresFiber™ pre-terminated multimode fiber cables will be available soon, simplifying installation even further: standard in-wall; armored in-wall (for more rugged environments), and transparent “fishing wire” fiber for virtually invisible outside-the-wall cable runs.
				
				
				You must be logged in to add more than four items to your comparison list.
			
		
			
				Register today!
			
		
			
				With a free My-iQ account, you'll be able to keep track of the latest updates and
						event notifications from your favorite AV
						manufacturers, manage your own projects and discover new pro-AV products.
			
		
			
		
	
    
    
        
            close
        
        
    
	
		
	
				 	Thank you!
				 
				 
				 	Someone will be in touch with you shortly.
				 
			
					Contact McCann Systems
				
			
				 	
				 		close
				 	
				 	
				 
			US B2B Inquiries Only
				
				
				
				
					Request more information from a dealer near you
				
			
					
						close
					
					
				
			
					Request more information from a dealer near you