Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SDI to Component Analog Video Converter
Model: 7730DAC
- SDI 525 or 625, 270Mb/s component digital video input
- One 270Mb/s re-clocked SDI output
- Four output BNCs for YPbPr or RGB and composite sync
- One composite analog output on BNC for monitoring and control
- One frame video synchronizer (with +S option)
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The 7730DAC line of serial digital video to component analog converters are broadcast quality D to A's with an extensive list of additional features. High quality digital to analog conversion of audio can be packaged with the video to create a D to A frame synchronizer with audio demux. In addition, Evertz fault monitoring processing will analyze and report video and audio problems via an On-Screen-Display, or remotely via VistaLINK® SNMP.
- SDI 525 or 625, 270Mb/s component digital video input
- One 270Mb/s re-clocked SDI output
- Four output BNCs for YPbPr or RGB and composite sync
- One composite analog output on BNC for monitoring and control
- One frame video synchronizer (with +S option)
- Infinitely variable output phase (27MHz clock increments)
- Freeze modes: black, freeze, pass
- Menu adjustable free running frequency
- VU/PPM bargraph level Indicators
- Decodes vertical interval time code (VITC), and "burns" the time code into the monitoring output picture
- A comprehensive on screen display is available to configure the various features of the module
- Flexible configuration of the text and audio bar graph information displays
- An extensive list of error conditions can be monitored and fault conditions can be configured from these conditions
- On screen messages can be triggered by the configured fault conditions
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Converter Signal Types - Video
- Converter Type - Digital to Analog Converter
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 259-C, 270Mb/s, 525/625 component
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Return Loss: > 15dB up to 270MHz
- Serial Video Input - Embedded Audio: SMPTE ST 272-A
- Serial Video Input - Frequency Lock Range: ±75ppm from nominal
- Analog Video Output - Standard: SMPTE/EBU N10, Betacam, MII and NTSC specific standards GBR or YPbPr formats, with or without setup
- Analog Video - Number of Outputs: 1
- Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output - Signal level: Video: 1V nominal; Sync: 300mV nominal
- Analog Video Output - Control Ranges: Output Level: > ±7.5% (all components); Black Level: ±10IRE
- Analog Video Output - Impedance: 75 Ohms
- Analog Video output - Return loss: > 40dB to 10MHz
- Video Performance - Frequency Response: < ±0.1dB (100kHz to 4.1MHz)
- Video Performance - Noise Floor: < -73dBrms (15kHz to 5MHz)
- Video Performance - Inter-channel Delay: < ±5ns
- Video Performance - Minimum Delay: 3µs
- Video Performance - Maximum Delay: 1 frame plus 3µs
- Number of Slots: 1
- Input Signal Types: Video
- Output (Converted) Signal Type: Video
- Active Power: 10 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
7730DAC-A4
- SDI to Component Analog Video Converter with 4-Channel Analog Audio Converter/Embedder
SDI to Component Analog Video Converter
82 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7730DAC
Request more information from a dealer near you
close
Request more information from a dealer near you