Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SDI to Component Analog Video Converter with 4-Channel Analog Audio Converter/Embedder
Model: 7730DAC-A4
- SDI 525 or 625, 270Mb/s component digital video input
- One 270Mb/s re-clocked SDI output
- Four output BNCs for YPbPr or RGB and composite sync
- One composite analog output on BNC for monitoring and control
- One frame video synchronizer (with +S option)
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The 7730DAC line of serial digital video to component analog converters are broadcast quality D to A's with an extensive list of additional features. High quality digital to analog conversion of audio can be packaged with the video to create a D to A frame synchronizer with audio demux. In addition, Evertz fault monitoring processing will analyze and report video and audio problems via an On-Screen-Display, or remotely via VistaLINK® SNMP.
- SDI 525 or 625, 270Mb/s component digital video input
- One 270Mb/s re-clocked SDI output
- Four output BNCs for YPbPr or RGB and composite sync
- One composite analog output on BNC for monitoring and control
- One frame video synchronizer (with +S option)
- Infinitely variable output phase (27MHz clock increments)
- Freeze modes: black, freeze, pass
- Menu adjustable free running frequency
- VU/PPM bargraph level Indicators
- Decodes vertical interval time code (VITC), and "burns" the time code into the monitoring output picture
- A comprehensive on screen display is available to configure the various features of the module
- Flexible configuration of the text and audio bar graph information displays
- An extensive list of error conditions can be monitored and fault conditions can be configured from these conditions
- On screen messages can be triggered by the configured fault conditions
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- One group (4 channels) of synchronous 20-bit audio is de-multiplexed from the incoming digital video
- 2 unbalanced AES audio inputs (up to 48kHz, 24 bits) on BNC
- User selects EITHER the de-embedded audio or the input AES audio
- The selected audio is delayed equivalently to the video delay with the +S option
- 4 high quality 24 bit audio channels are output (analog) as balanced on 2 removable barrier strips
- Low impedance outputs (66 Ohms)
- Analog audio output levels are adjustable
- Additional audio delay of up to 5 seconds
- Additional audio advance of up to 1 frame, depending on video delay Loss of video modes: pass audio, mute audio
- Converter Signal Types - Audio & Video
- Converter Type - Digital to Analog Converter
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 259-C, 270Mb/s, 525/625 component
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Return Loss: > 15dB up to 270MHz
- Serial Video Input - Embedded Audio: SMPTE ST 272-A
- Serial Video Input - Frequency Lock Range: ±75ppm from nominal
- Analog Video Output - Standard: SMPTE/EBU N10, Betacam, MII and NTSC specific standards GBR or YPbPr formats, with or without setup
- Analog Audio - Number of Outputs: 4
- Analog Audio Outputs - Type: Balanced analog audio
- Analog Audio Outputs - Connector: Two 6-pin removable terminal strips
- Analog Audio Outputs - Impedance: 66 Ohms balanced
- Analog Audio Outputs - Sampling Frequency: 48kHz
- Analog Audio Outputs - Signal Level: 0dBFS => 12 to 25dBu (user settable)
- Analog Audio Outputs - Frequency Response: < ±0.05dB (20Hz to 20kHz)
- Analog Audio Outputs - Dynamic Range: 24 bits when AES inputs selected, 20 bits when embedded audio selected
- Analog Audio Outputs - THD+N: < 0.001% (> 100dB) at 1kHz, -1dBFS
- Analog Audio Outputs - Crosstalk: < -105dB (20Hz to 20kHz)
- Analog Audio Outputs - DC Offset: < ±30mV
- Analog Audio Outputs - SNR: > 110dB "A" Weighting
- Analog Audio Outputs - Inter-Channel Phase Error: < ±1° (20Hz to 20kHz)
- AES Audio Inputs - Standard: SMPTE ST 276, single ended synchronous or asynchronous PCM AES
- AES Audio - Number of Inputs: 2
- AES Audio Inputs - Connector: BNC per IEC 61169-8 Annex A
- AES Audio Inputs - Resolution: 24 bits
- AES Audio Inputs - Sampling Rate: 32kHz to 48kHz on inputs, synchronous 48kHz on outputs
- AES Audio Inputs - Minimum I/O Delay: 2.1ms
- AES Audio Inputs - Maximum I/O Delay: 5s
- Number of Slots: 2
- Input Signal Types: Audio, Video
- Output (Converted) Signal Type: Audio, Video
- Active Power: 17.50 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
7730DAC
- SDI to Component Analog Video Converter
SDI to Component Analog Video Converter
82 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7730DAC-A4
Request more information from a dealer near you
close
Request more information from a dealer near you