• Microphone Type - Electret Condenser
• Polar/Pickup Pattern - Other
• Spec Sheet available - Yes

• Operating Temperature (Maximum): 135 F
• Operating Temperature (Minimum): 0 F
• Cable Length: 10 ft
• Maximum Frequency Response (Bandwidth): 17 kHz
• Maximum Frequency Response (Bandwidth): 17000 Hz
• Minimum Frequency Response (Bandwidth): 50 Hz
• Minimum Frequency Response (Bandwidth): 0.05 kHz
• Impedance: 150 ohm
• DC Voltage: 52 Volts
• Product Weight: 1.83 lbs
• Shipping Weight: 25.25 lbs
• Dynamic Range: 96.20 dB
• Certifications: CE
• Current Draw: 0.01 Amps
• Depth: 22.90 in
• Height: 7.70 in
• Shipping Depth (with packaging): 23 in
• Shipping Height (with packaging): 24 in
• Shipping Width (with packaging): 20.15 in
• Width: 10 in
• Output Impedance: Rated at 150 ohms (180 ohms actual)
• Dynamic Range with 1k ohms load: 94 dB
• Common Mode Rejection: 45 dB
• Mute Switch Attenuation: 50 dBaOutput Impedance|EIA rated at 150 Ohm (170 Ohm
• Common Mode Rejection: 45 dB minimum (10 Hz – 100 kHz)
• Preamplifier Output Clipping Level 1% THD: –6 dBV (0.5 V)
• Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Mute Switch Attenuation: –50 dB minimum
• Relative Humidity: 0 – 95%
• Power Requirements: 11 – 52 VDC phantom
• Preamplifier Output Clipping Level: –6dBV (0.5V)
• Relative Humidity: 0 to 95 %
• Type: The attached custom cable contains a shielded audio pair and three unshielded conductors for logic control
• Cable Overall diameter: 0.165 in
• Certification: Eligible to bear CE Marking, Conforms to European EMC Directive 89/336/EEC, Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments